Armstrong Clark Stain Samples
Armstrong Clark Stain Samples
Armstrong Clark Stain Samples

Samples

2 Ratings 2 Reviews
$10.00
free shipping with ground services
NamePrice:
Transparent Natural Tone
$10.00
Transparent Cedar Tone
$10.00
Transparent Redwood Tone
$10.00
Semi-Trans Cedar
$10.00
Semi-Trans Rustic Brown
$10.00
Semi-Trans Sierra Redwood
$10.00
Semi-Trans Natural Oak
$10.00
Semi-Trans Chestnut
$10.00
Semi-Trans Driftwood Gray
$10.00
Amber
$10.00
Mahogany
$10.00
Semi-Trans Black Walnut
$10.00
Semi-Solid Mtn. Cedar
$10.00
Semi-Solid Sequoia
$10.00
Semi-Solid Woodland
$10.00
Semi-Solid Oxford
$10.00
Semi-Solid Espresso
$10.00
Back to: Armstrong Clark Stain Samples

Armstrong Clark Wood Stain Color Chart

Reviews

Friday, 13 November 2020

Great for testing on your wood.

Armstrong

Thursday, 22 June 2017

Test your Armstrong Clark colors before you buy!

Administrator

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Scott Slinde · 04/17/2018
    What type and color stain best for cedar fences
    • We will reply to your comment shortly
      Armstrong · 04/17/2018
      Any color you like will work for a fence. Does not matter. Most use semi-transparent colors.
  • We will reply to your comment shortly
    Michael · 03/19/2018
    May be a dumb question, but the "natural tone" stain has no color? i.e. the color will be whatever the underlying woods natural color is? I have an IPE deck and want to seal to protect from UV weathering of the color, but also want just the natural color of the IPE. I am not looking to change the color of the IPE just prevent it from fading to grey.
    • We will reply to your comment shortly
      Armstrong · 03/19/2018
      Natural is lightly tinted and has color. It is impossible to not change the color and prevent graying at the same time. The color tint is what gives the UV protection from graying. So if you want to prevent graying, you must have a tinted stain and that will enhance/change the natural grain of the wood.
  • We will reply to your comment shortly
    Nancy · 03/14/2018
    I can’t decide what stain to choose. I have American redwood which has some lighter and darker tones in it. If I pick a semi-transparent stain will it make the deck look like the color in the picture?
    • We will reply to your comment shortly
      Armstrong · 03/15/2018
      Hello, final colors on your deck will vary based on the type of wood, age of wood, application, etc so it will not look exactly the same as the sample chart above. Please try a few samples that you are considering on your wood so you will be able to determine what works best.
  • We will reply to your comment shortly
    Mark · 03/13/2018
    In the Semi Solid I would like a dark charcol color, almost black, can the Oxford Brown or Sequoia be furhter tintied at a local paint shop to get them darker?
    • We will reply to your comment shortly
      Armstrong · 03/13/2018
      Sorry but no they cannot.
  • We will reply to your comment shortly
    Jim Hough · 03/02/2018
    In December, I purchased exterior furniture made from oak wine barrels (chairs, benches, and table). The vendor applied a stain that has rapidly faded as it has been exposed to the wet weather ... obviously, the wrong stain. Would your product be able to successfully penetrate oak to provide appropriate protection?
    • We will reply to your comment shortly
      Armstrong · 03/03/2018
      As long as you prep correctly and you fully remove the previous coating, the AC should work. Just one coat of the stain. Being a hardwood, oak will need reapplication every 1-2 years, depending on the weather and UV exposure.
  • We will reply to your comment shortly
    Charles Reed · 02/25/2018
    Do you have any retail dealers in Alabama
    • We will reply to your comment shortly
      Armstrong · 02/25/2018
      There are not any there. Shipping takes about 2-3 days.
  • We will reply to your comment shortly
    Sarita Eisenstark · 12/03/2017
    As a result of repairs on my garage/shed, I have brand new light-colored cedar shakes mixed in with very old dark brown cedar shakes. Is there a best way to stain the new shakes so they'll blend in or closely approximate the dark brown? My cedar is rougher and more rustic than the photo below, but the color contrast is comparable.
    Thanks
    • We will reply to your comment shortly
      Armstrong · 12/03/2017
      You would need to strip and brighten all the old shakes first so the dark brown is removed. For the AC stain after this prep, look at Rustic Brown or Black Walnut for a dark brown.
  • We will reply to your comment shortly
    David · 12/01/2017
    Hi, I have a new IPE wood dock in the Florida sun and was wondering how long can you go between coatings (years) Thanks David
    • We will reply to your comment shortly
      Armstrong · 12/02/2017
      With with exotic hardwoods like IPE wood, you will have to recoat annually. The issue is the extreme density of the IPE, not the stain, that creates this annual reapplication. Just light clean and reapply.

      Thanks
  • We will reply to your comment shortly
    Denise Kolenda · 10/09/2017
    Can I mix a little drift wood with the rustic brown to create a unique color?
    • We will reply to your comment shortly
      Armstrong · 10/10/2017
      Yes, you can mix AC colors.
  • We will reply to your comment shortly
    Armstrong · 09/17/2017
    Hutch Hostetler:
    I am looking to put this stain on deck that has what they call " sun wood " . It's a reddish treated wood used for decks. I am curious as to whether or not when I buy a 5 gallon bucket, if I can have it be one that is pre mixed, or am I stuck with having to buy 2-1/2 gallons of each color, and going from there. I was thinking of using the Cedar semi- transparent and mixing it with the chestnut to get a little lighter color in case it might be a little dark. Would that work? Thanks!

    We do not custom mix colors. AC colors can be intermixed though on your end.
  • We will reply to your comment shortly
    Hutch Hostetler · 09/16/2017
    I am looking to put this stain on deck that has what they call " sun wood " . It's a reddish treated wood used for decks. I am curious as to whether or not when I buy a 5 gallon bucket, if I can have it be one that is pre mixed, or am I stuck with having to buy 2-1/2 gallons of each color, and going from there. I was thinking of using the Cedar semi- transparent and mixing it with the chestnut to get a little lighter color in case it might be a little dark. Would that work? Thanks!
  • We will reply to your comment shortly
    Armstrong · 09/07/2017
    Todd Yamello:
    Is the redwood tone color only available in transparent? We applied this a couple years ago and I thought it was available as a semi-transparent or semi-solid color but I don't see that in color chart. Thanks.

    Sierra Redwood is the semi-transparent color.
  • We will reply to your comment shortly
    Todd Yamello · 09/07/2017
    Is the redwood tone color only available in transparent? We applied this a couple years ago and I thought it was available as a semi-transparent or semi-solid color but I don't see that in color chart. Thanks.
  • We will reply to your comment shortly
    Armstrong · 09/04/2017
    Steve Merrill:
    Good day. I live in Rapid City, South Dakota. Where is the nearest retailer or dealer?

    We ship directly from our website to your door as there are not any dealers there.
  • We will reply to your comment shortly
    Steve Merrill · 09/03/2017
    Good day. I live in Rapid City, South Dakota. Where is the nearest retailer or dealer?
  • We will reply to your comment shortly
    Armstrong · 09/02/2017
    Lv:
    We have a log cabin stained in Sikkens Cetol 1 and 23 in NATURAL. Which of your transparent stains would match closest to that color as we have stripped Behr solid stain off and are now ready to apply Armstrong stain.

    Sorry, but we are not familiar with Sikkens colors. Please try a few color samples to test.
  • We will reply to your comment shortly
    Lv · 09/02/2017
    We have a log cabin stained in Sikkens Cetol 1 and 23 in NATURAL. Which of your transparent stains would match closest to that color as we have stripped Behr solid stain off and are now ready to apply Armstrong stain.
  • We will reply to your comment shortly
    Armstrong · 08/27/2017
    Patrick Sommers:
    What is the shelf life of unused portion left in a 5 gal container? Or is it best to re-seal in 1 gal containers? My project is expected to stretch over two years hence the question.

    12 months or less with an opened 5 gallon pail. you can try to seal in singles gallons and it should last a little longer. Cannot be stored in a freezing situation.
  • We will reply to your comment shortly
    Patrick Sommers · 08/26/2017
    What is the shelf life of unused portion left in a 5 gal container? Or is it best to re-seal in 1 gal containers? My project is expected to stretch over two years hence the question.
  • We will reply to your comment shortly
    Armstrong · 08/11/2017
    Ann Dunstan:
    I want a stain to put on a weed deck that surrounds a swimming pool with chlorine in it. Will this stain peel from the chlorine and dampness? I live in Toronto Ont and I would like to know the price. Thank you in advance

    It will not peel but chlorine can damage a deck stain by "bleaching" out the color. Prices are on the website. For shipping costs, add products to cart and enter your shipping info.
  • We will reply to your comment shortly
    Ann Dunstan · 08/10/2017
    I want a stain to put on a weed deck that surrounds a swimming pool with chlorine in it. Will this stain peel from the chlorine and dampness? I live in Toronto Ont and I would like to know the price. Thank you in advance
  • We will reply to your comment shortly
    Armstrong · 08/02/2017
    Richard Nestor:
    Do you ship to Quebec Canada.
    If so..if I would like 4 samples..what would be the cost including shipping.
    Thanxs.

    We do ship there. Please add to cart and enter your shipping info at checkout page to see the total cost.
  • We will reply to your comment shortly
    Richard Nestor · 08/02/2017
    Do you ship to Quebec Canada.
    If so..if I would like 4 samples..what would be the cost including shipping.
    Thanxs.
  • We will reply to your comment shortly
    Armstrong · 07/30/2017
    LarryF:
    Do you have fire resistant deck stains available?

    We do not.
  • We will reply to your comment shortly
    LarryF · 07/29/2017
    Do you have fire resistant deck stains available?
  • We will reply to your comment shortly
    Armstrong · 07/20/2017
    James T:
    I'm interested in the shine and protection of polyurethane to my new douglas fur deck. After applying the AC transparent Cedar stain can I apply one or more coats of polyurethane?

    No. It is a very bad idea to make a deck look shiny or top coat it with a poly. It will blister, peel, attract mold, and will be a nightmare to fix.
  • We will reply to your comment shortly
    James T · 07/19/2017
    I'm interested in the shine and protection of polyurethane to my new douglas fur deck. After applying the AC transparent Cedar stain can I apply one or more coats of polyurethane?
  • We will reply to your comment shortly
    Clifford Klump · 07/10/2017
    Ordering 4 sample colors of semi transparent
  • We will reply to your comment shortly
    Victor Ortiz · 07/04/2017
    I live in New York City and a two year old deck. My deck is exposed to hot summers and snowy winters. My stairs are exposed to the sun year round but the rest of the deck is under an awning.Would you recommend a semi-transparent or a semi-solid for my deck. I am leaning towards a natural wood look but I want to protect my deck as much as possible. Thank you
  • We will reply to your comment shortly
    Administrator · 06/21/2017
    Dan Phillips:
    I read where it you are not suppose to have wood filler in the deck. Unfortunately, I had already filled some holes with wood filler. Any advice on how to proceed with your stain. Also, I'm not sure where my form is that I had order four sample stains. Is there any way I can still get credit for the 5 gallon container.

    Hello, there is no way to darken the filler with the AC stains. You could possibly darken the filler with a similar color in a Minwax stain but not sure if that will blend or not.

    Fro sample credit, we need an invoice for the sample order.