Samples

Deck in Cleveland area going in by end of september, probably either cumaru or redwood. Question on staining, temp will be cool, leave until spring? Or get stain on asap?

Can i pick up the stain from your Rochester MI location?

Woodland Brown is reddish/brown. It does have a good amount of red in it.

We ordered a few samples and liked the saturation of color with Sequoia, but thought it was too red for our taste. Is woodland brown a similar saturation without the red? I also see Oxford brown, but not sure I want something that deep.
I would order more samples, but I cleaned and brightened the deck today, and would like to stain as soon as possible.
Thanks!

Your stains are described as transparent, semi-transparent, semi-solid, or none (Amber and Mahogany). Can you explain what these terms mean, and how they affect the decision of what stain to use? (or point me to where on the web site that they are described!).

4Szabos, there is not a lighter brown color. There is the semi-cedar but it is more of an caramel color.

I just received my sample of rustic brown and tried it on some scrap cedar from my pergola. The color is a shade or two darker than I would like, is there a semi transparent color a little lighter but not red? This is going on a 2 month old red cedar pergola on a deck 15ft x 20 ft.

Fred, the transparent colors will fade faster than the semi-transparent colors. You should let the new wood season for 2-3 months and prepped with a deck cleaner and wood brightener before staining. I would get 2-3 samples to test.

Hi,

Looks like your product has gotten great reviews! I'm rebuilding my decks utilizing con-heart redwood for the deck and 4 x 4 posts and 2 x 6 railing. Would you recommend the natural tone transparent color or the redwood tone transparent? Thanks.

Tim S, very similar to the semi-transparents. Maybe a little less.

I see your comment about transparent Amber giving better UV protection than the other tranparent colors. My question is, does Amber provide the same UV protection as the semi-transparent colors?

The Mahogany is the most popular color for IPE wood.

Which color would you recommend to stain ipe deck. I messed up and water pressured the deck leaving mark on it. I need now to stain it to recover its uniformity.
Thanks

I would add just a little at a time of the Oxford brown into the Mahogany until you achieve your desired color.

You cannot lightly apply the Oxford on top of the Mahogany for the rails. You should try adding a coat of your mix to the rails to see if that works.

I recently purchased the Mahogany stain, applied to just the rails on the deck and it is redder than I want. I ordered a sample of the Oxford semi-solid, which I would like to try to mix with the mahogany to see if I can get a better color. Since I already used 1 gal+ of the 5 gal pail, I want to add some of the oxford to that and return the other pail of the unopened mahogany. p.s. the deck is pressure treated pine, 30 yrs old and nothing done to it in at least 10 yrs. Very dry. Questions: 1. Can I mix the mahogany & oxford? 2. Since the rails have 2 coats of the mahogany, could I touch up (lightly apply) with the oxford just to get some of the redness out? Thanks, Debbie

Hi,

I need to know if this product (Mahogany) is recommended for a 1 year old pressure treat wood deck, 1st time stain in north west NJ.
I need to know too dealers in NJ

Thanks.

Please reorder the additional sample.

Hi,
I ordered the Sierra redwood sample (together with RAD) a few minutes ago. Could you also send me a sample of the Transparent redwood? I would like to compare them.

You would need to wait a at least a year or strip it off now to the bare wood.

How soon can I reapply the new color? I like to get this done before the rains start.

Kevin, Oxford brown is a darker brown with no red. I would be careful of applying too much stain as it may not be able to penetrate into the wood properly.

I purchased 5 gallons of the semi-solid Woodland which came out redder than we thought based on the color chart above. We we're looking for a chocolate brown in a semi-solid. 2 questions, can we cover the stain with one that is darker, and what would be closest to what we want which is a chocolate brown?

There currently is not be we can ship to you.

Are there any dealers in the Atlanta Georgia area, specifically Fayette County, GA

Tony, there are not any dealers there but we can ship to you.

Where can I purchase this product in Western New York?

The higher the solids, the better the UV protection.

Is there any difference with the UV protection provided by the different stains? I'm at 5500 feet elevation in the desert - receiving intense direct sunlight. I'm looking for a medium or somewhat dark brown.

Armstrong is typically reapplied every couple of years on horizontal surfaces. I can be applied to all wood types as long as the wood is prepped correctly.

Your site doesn't explain how to maintain deck after it is stain. How frequently does this need to be applied? Can I use it on pecky cypress?
Thanks, Vicki