RAD Stain Stripper/Brightener Kit

free shipping with ground services

1 RAD Stripper and 1 RAD Brightener

Coverage: 500-1000 sq. feet per kit. Each Kit Makes 5 Gallons of Stain Stripper and 5 Gallons of Wood Brightener

Restore-A-Deck Stain Stripper is the only concentrated powdered wood stain stripper that is specifically designed to be injected through a pressure washer. RAD Stripper may also be applied using a garden type sprayer.

The R-A-D Stain Remover, when injected using a pressure washer, can remove penetrating transparent stains as well as semi-transparent wood coatings.

When RAD Wood Stain Stripper is applied using a pump-up sprayer, it is twice as potent and able to remove most transparent, semi-transparent and even semi-solid wood stains. It is also excellent for getting rid of failed semi-transparent acrylic stains. Coverage rates when applied with a pump sprayer are 100-200 sq. ft per gallon.

After using Restore-A-Deck Injectable Stain Stripper, the wood needs to be neutralized with the RAD Step 2 Brightener.


  • #1 Rated Wood Deck Stain Stripper
  • Removes most clear, transparent, semi-transparent, and semi-solid coatings.
  • Powdered formula makes 5 liquid gallons when mixed
  • Extremely cost effective. When mixed, the cost is less than $7 a gallon.
  • Eco-Safe formulas
  • Preps previously stained wood and decks
  • Safe to use on all exterior wood surfaces, not just decks
  • Applied with pump sprayer for max results or injected through pressure washer for easier to remove finishes
  • Can be mixed at a stronger ratio for difficult to remove finishes. Max would be 3 gallons of water to one container of Restore-A-Deck Stripper

Coverage: 500-1000 sq.feet per container.

*Will not remove solid color stains, paints, or polyurethanes.


Sunday, 25 June 2017

Use the Restore A Deck Stripper kit for removal of old transparent and semi-transparent coatings.


Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    nottheoneyouknow · 06/08/2014
    We have a deck that was built 3 years ago and stained with TWP. The TWP is gone on the horizontal surfaces, and on the vertical surfaces that get the most sun. I am planning to refinish it with your Amber semi-transparent. To prep, should I use RAD stripper on the entire deck, or RAD cleaner on the parts where the TWP is gone and stripper only where the TWP remains? Or is cleaner enough for the whole thing?