Choosing Armstrong Clark Oil Based Wood Stains will ensure lasting beauty and protection for all your exterior wood surfaces. Backed by five generations of experience in oil-based coatings and cutting edge technology, Armstrong Clark Wood Stains will not only meet your wood protection needs but far exceed them.

Determine the square footage area of the surface you plan to stain. On decks be sure not only to measure the floor but also railings, spindles, steps and all areas that you are planning to stain. Armstrong-Clark Deck and Siding Stains will cover approximately 150-200 sq. ft. per gallon depending on age and wood porosity.

The most crucial step in any exterior wood restoration or maintenance project is to properly prep the surface before staining. Armstrong Clark Wood Stains are quality-formulated wood coatings with five generations’ worth of experience that will give your deck lasting beauty and protection.

To ensure the expected results from any of the Armstrong Clark Oil-Based Wood Stain products, the wood surface must be cleaned and prepped prior to staining.

The exterior wood surface being refinished needs to be free of dirt, grime, gray wood fibers, and old deck stain or sealer. Even new wood needs to be cleaned to remove mill glaze and contaminants. For newer or grayed-out wood, we highly recommend using Restore-A-Deck Wood Cleaner and Brightener. This two-step powder system is specially designed to clean and prepare wood for new stain.

Here is great video from one of our customers showing how to prep and apply a maintenance coat of the Armstrong Clark Wood Stain.