Armstrong Clark is a penetrating oil based stain that will soak deep into the wood grain offering protection from UV graying and water. The advantages to a penetrating deck stain is that they will not peel but rather fade over the years. The key though is proper prep before applying your AC especially if your wood is new.

New "smooth" wood should not be stained right away with Armstrong Clark. A few things need to happen first:

The most important step in any exterior wood restoration or maintenance project is to prep the surface properly prior to staining. Armstrong Clark Wood Stains are quality formulated wood coatings with five generations worth of experience that will give your deck lasting beauty and protection.

To ensure you get the expected results from any of the Armstrong Clark Oil Based Wood Stain products it is essential that the wood surface is cleaned and prepped prior to staining.

The exterior wood surface being refinished needs to be free of any dirt, grime, gray wood fibers, and any old deck stain or sealer. Even new wood needs to be cleaned to remove mill glaze and contaminants. For newer or grayed out wood we highly recommend using Restore-A-Deck Wood Cleaner. This two-step powder system is specially designed to clean and prepare wood for new stain.


Choosing Armstrong Clark Oil Based Wood Stains will ensure lasting beauty and protection for all your exterior wood surfaces. Backed by five generations of experience in oil-based coatings and cutting edge technology, Armstrong Clark Wood Stains will not only meet your wood protection needs but far exceed them.

Determine the square footage area of the surface you plan to stain. On decks be sure not only to measure the floor but also railings, spindles, steps and all areas that you are planning to stain. Armstrong-Clark Deck and Siding Stains will cover approximately 150-200 sq. ft. per gallon depending on age and wood porosity.

Armstrong stain offers a wide variety of color choices in an oil based semi-transparent penetrating formula. It should be noted that with any brand of wood stain, colors cannot be guaranteed. Colors and tones can vary depending on the wood type, the age of the wood, the condition of the wood, wood prep, and stain application.

Armstrong stain colors currently include Natural Tone, Cedar Tone, Redwood Tone, Cedar Semi, Sierra Redwood, Rustic Brown, Mountain Cedar, Sequoia, Woodland Brown, Oxford Brown, Mahogany, Amber, and Driftwood Gray.

Armstrong Clark Stains in Mahogany, Amber, and Black Walnut Colors

The key to a good wood stain is one that will protect, last long, and reduce the frequency of maintenance recoats. When it comes to IPE and other exotic hardwoods, maintenance can be more frequent than on more typical wood species. This is due to the dense nature of the hardwood. It can be tricky to get a stain to penetrate the wood and once it does, it does not want to hold for more than a year or so. This is really just the nature of exotic hardwood.

Best Semi-Solid Deck Stain

Deck stains come in different transparency levels. The more transparent or the less opaque a stain is, the more the natural wood grain shows through. This category is referred to as the semi-transparent deck stains.

The more opaque less transparent deck stains are commonly called the semi-solid deck stains. So basically the transparency scale in order starting with the least opaque would be a clear sealer, semi-transparent stain, semi-solid stain, and solid stains.

Page 4 of 5