Armstrong deck and siding stain utilize nondrying conditioning oils that divide from the drying side of the formula. These deep penetrating oils soak into the wood fibers where the wood's natural oils used to be. This procedure revitalizes the wood.

The drying oils remain at the surface while locking in the conditioning oils to form a dry to the touch barrier. Armstrong-Clark wood deck and siding stains also have vegetable oils, translucent oxide pigments, mildewcide, solvent, and water repellents.

Armstrong-Clark stains are quality formulas back by five generations worth of experience in oil-based coatings together with modern technology. Armstrong-Clark wood stains can far exceed your expectations for oil-based coatings.

Suggested Use For...

  • All Decking: Cedar, Redwood, Pressure Treated Pine, IPE, Mahogany, etc
  • All Natural Wood Siding
  • Exterior Wood Stairs
  • Log Homes
  • Roof and Siding Shakes and Shingles
  • Fences
  • Playground Equipment
  • Docks

Product Specialties...

  • It's the only oil-based wood coating that can be applied in direct sunlight and heat of the day.
  • One or two coat system. If desired, an additional coat can be applied to your decks, sidings, shingles, and other items by wet-on-wet or wet-on-dry.

Armstrong Clark Stain for Decks

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    LS · 05/17/2022
    Not quite sure what to do and how to proceed. I unfortunately I have had a nightmare experience with a company that I asked to stay in my deck and this is the result with the Armstrong Sierra Redwood. I do believe that probably nothing was done correctly I believe that there was probably too much stain poured on the deck and then they intern took a rag to try and wipe it all off so this is my question
     What do I do now? Essentially I feel like the deck is ruined not the wood of course,but do I start over? Do I have it re-sanded and start  from the beginning do everything again with a different company
    I’m hoping that you can help me with this
    I have no idea what the best direction is to take to rectify the damage that’s already been done 
  • We will reply to your comment shortly
    Julia · 12/21/2020
    I recently used the Armstrong Clark stain to finish our balconies. Our house has stuccos siding and needs to be cleaned. Typically, I use a bleach and TSP combination to clean the stucco. Will this bleach/TSP solution will effect the balcony stain? It will be difficult to avoid getting it on the balconies.
    • We will reply to your comment shortly
      Armstrong · 12/21/2020
      The bleach will harm or "bleach" out the stain color.
  • We will reply to your comment shortly
    Scott Paul · 11/13/2020
    testing this