Brand new this year to the great Armstrong Clark Wood Stain colors is the new Espresso Semi-Solid. This new semi-solid color will highlight the wood grain with a rich deep brown tone while offering the best UV protection of our stain color choices.

We now offer several 5 semi-solid deck stain colors: Espresso, Mountain Cedar, Sequoia, Woodland, and Oxford Brown. 

Armstrong Clark Semi Solid Colors

 

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Crystal H · 04/06/2021
    Can you post a few pictures of completed decks that were done in Espresso? Thank you in advance!
  • We will reply to your comment shortly
    terry findley · 03/13/2021
    where do i order?
  • We will reply to your comment shortly
    Darlene · 07/19/2020
    I just had a new redwood fence installed. So if I understand correctly I am to wait a year before using the Semi-solid product? I'm not happy with the variation of the redwood board colors and want to stain it for a more even and protected look.
  • We will reply to your comment shortly
    Gerard · 05/31/2020
    Can "new" wood wait a year stored in a shed or does it need to be installed and exposed to the elements?
    • We will reply to your comment shortly
      Armstrong · 05/31/2020
      Needs to be installed and then weathered.
  • We will reply to your comment shortly
    Tony Papa · 05/22/2020
    I had stained my home with cabots stain, Oxford brown five years ago. The clean up
    was with soap and water. Will this product work over the stain that is on there now.
    Will the product penetrate into the wood once it was done before with the stain I
    used in the past. I was told that I can’t use an oil based stain once I had used a water
    based product.
    • We will reply to your comment shortly
      Armstrong · 05/23/2020
      No, you would have to remove the Cabot fully first.
  • We will reply to your comment shortly
    Lmatt · 05/19/2020
    Can A.C. Semi-solid stain be applied to new KD PT pine decking without waiting a year as you suggest. KD lumber can usually be stained when new.
    • We will reply to your comment shortly
      Armstrong · 05/19/2020
      No, it has to wait a year for the semi-solid, and KDAT cannot be stained right away even with the semi-transparent stain. That is false info they tell folks.
  • We will reply to your comment shortly
    Susie · 05/17/2020
    Will AC semi solid oxford brown or espresso be able to cover this pressure treated wood?
    • We will reply to your comment shortly
      Armstrong · 05/17/2020
      Not unless you remove the current stain.
  • We will reply to your comment shortly
    Linda · 05/08/2020
    I’ve purchased A-C semi-solid Mountain Cedar to apply to a cedar porch that we have sanded to bare wood. After all that work and wanting this application to last as long as possible, we’re wondering if we should/could apply 2 coats with a short drying time in between coats. I believe I read that your semi-solid stain should not be applied wet-on-wet, is that correct? Would 2 coats help the finish last longer? The large side of porch faces south.
    • We will reply to your comment shortly
      Armstrong · 05/08/2020
      Only one coat will work on this sanded wood. Do not apply two. It will not cure correctly.
      • We will reply to your comment shortly
        Linda · 05/08/2020
        We thought a 2nd coat might give us longer longevity before we have to do this process all over again. How long will Mountain Cedar semi-solid curing take - week, or weeks, month(s), a year? We are prepared to wait a week between coats if we can gain longevity. Can we gain more longevity in years on our porch restoration if we apply a 2nd coat once the 1st coat has cured?
        • We will reply to your comment shortly
          Armstrong · 05/09/2020
          No, more is not better and will not last longer or cure properly.
  • We will reply to your comment shortly
    K · 08/17/2019
    I did my deck in semi transparent rustic brown and it looks wonderful! But I’m thinking next time I would like to go a bit darker and try your new expresso semi solid. 1. How long do I have to wait before I try another stain after apply this first one? 2. Can I put semi solid over semi transparent? 3. What prep would I do to the deck before I try a new stain?
  • We will reply to your comment shortly
    Rhonda · 07/17/2019
    Previously used Behr Deckover on Michigan deck with disastrous results! Peeling year after year, application after application. Like the idea of semi-solid but cannot have the peeling issues again after spending two summers scraping, sanding and prepping! Is your semi-solid good for Michigan weather without peeling? If not, what do you recommend?
    • We will reply to your comment shortly
      Armstrong · 07/17/2019
      It is a penetrating stain and does not peel.
  • We will reply to your comment shortly
    Mike · 06/03/2019
    Is this product good for outdoor teak furniture?
    • We will reply to your comment shortly
      Armstrong · 06/03/2019
      Sorry but no, do not use the semi-solids on furniture.