Armstrong Clark Stain is a low VOC product and compliant for all states and Canada!

Need it shipped to you? We are able to ship to all states below within 2-5 business days!

We ship from the Metro Detroit Area to Canada. All Canadian shipped orders must be place on website. We do not take orders over the phone to be delivered into Canada. For general questions please call 248.858.8900.

Orders may also be picked up in Metro Detroit Area at our retail location:

2388 Franklin Rd

Bloomfiedl Hills, Mi 48302

Alabama
Arizona
Arkansas
California
Colorado
Connecticut
Delaware
Florida
Georgia
Idaho
Illinois
Indiana
Iowa
Kansas
Kentucky
Louisiana

Maine
Maryland
Massachusetts
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Jersey
New Mexico
New York
North Carolina
North Dakota

Ohio
Oklahoma
Oregon
Pennsylvania
Rhode Island
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
Washington
West Virginia
Wisconsin
Wyoming

 {jcomments on}

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Administrator · 05/12/2016
    mike rogers:
    I have a Brazilian Tiger Wood deck. Never been sanded, has been power washed along with a cleaner, a brightener then a clear stain. The finish is great but doesn't last long. Its been 3 years since I have done anything to it It is now gray. I would like to refinish it, thinking the steps are to use a cleaner, then a brightener then power wash it off. Sand it with 60 grit then 80 grit. Then apply a good deep penetration stain that is oil based
    Am I on the right track? Do you have the products I need. The deck is about 350 feet.

    Yes we have the products for your wood type. Look at the Armstrong Clark in Mahogany or Amber colors. Prep with our Restore A Deck Kit. Just one of the kits is enough. 2 gallons should cover for your sq. footage.
  • We will reply to your comment shortly
    mike rogers · 05/12/2016
    I have a Brazilian Tiger Wood deck. Never been sanded, has been power washed along with a cleaner, a brightener then a clear stain. The finish is great but doesn't last long. Its been 3 years since I have done anything to it It is now gray. I would like to refinish it, thinking the steps are to use a cleaner, then a brightener then power wash it off. Sand it with 60 grit then 80 grit. Then apply a good deep penetration stain that is oil based
    Am I on the right track? Do you have the products I need. The deck is about 350 feet.
  • We will reply to your comment shortly
    Administrator · 05/12/2016
    Kari:
    Do you have dealers in Nebraska?

    We do not. Shipping takes about 3 business days.
  • We will reply to your comment shortly
    Kari · 05/12/2016
    Do you have dealers in Nebraska?
  • We will reply to your comment shortly
    Administrator · 05/09/2016
    john poire:
    looking for dealer in Missoula mt

    No dealers in your area. We can ship there in 3-4 days.
  • We will reply to your comment shortly
    john poire · 05/09/2016
    looking for dealer in Missoula mt
  • We will reply to your comment shortly
    Administrator · 05/02/2016
    Sherri Carlson:
    Can you tell me if you have a dealer in Austin, Tx. Would like to be able to see colors in person before purchasing.

    We do not have dealers there. We can ship to you. We also have samples to see colors here:

    http://www.armstrongclarkstain.com/samples
  • We will reply to your comment shortly
    Sherri Carlson · 05/02/2016
    Can you tell me if you have a dealer in Austin, Tx. Would like to be able to see colors in person before purchasing.
  • We will reply to your comment shortly
    Administrator · 04/21/2016
    Dennis Moore:
    Do you have any dealers in either Niagara Falls N.Y. or Buffalo?
    No there are not any dealers there.
  • We will reply to your comment shortly
    Dennis Moore · 04/21/2016
    Do you have any dealers in either Niagara Falls N.Y. or Buffalo?
  • We will reply to your comment shortly
    Administrator · 04/20/2016
    Paulette Cawthon:
    Do you have any dealers in Dallas, Texas?

    We do not. Shipping takes about 3-4 days to get there.
  • We will reply to your comment shortly
    Paulette Cawthon · 04/20/2016
    Do you have any dealers in Dallas, Texas?
  • We will reply to your comment shortly
    Administrator · 04/19/2016
    Davcor Building Serv:
    I am looking for pricing for 10 gallons of woodland brown semi solid stain including shipping to Atlanta, GA. Thank you
    Mike Davis

    You can buy right from our website. 5 Gallons pails ship free:

    http://www.armstrongclarkstain.com/armstrong-clark-stain-5-gallon

    Thanks
  • We will reply to your comment shortly
    Davcor Building Serv · 04/18/2016
    I am looking for pricing for 10 gallons of woodland brown semi solid stain including shipping to Atlanta, GA. Thank you
    Mike Davis
  • We will reply to your comment shortly
    Administrator · 04/14/2016
    Trip Kennedy:
    Do you have a dealer in the Vancouver / Victoria BC Canada area?

    No dealers in Canada but we can ship it there.
  • We will reply to your comment shortly
    Trip Kennedy · 04/13/2016
    Do you have a dealer in the Vancouver / Victoria BC Canada area?
  • We will reply to your comment shortly
    Administrator · 04/06/2016
    Michael DAtri:
    Hello. Do you have and dealers in Illinois? How could I get a color sample of all the color stains you offer?

    Thank you.

    Michael D'Atri

    Sorry but no dealers in IL. We are in MI and can ship there in 1-2 days. Samples are on this link:

    http://www.armstrongclarkstain.com/samples
  • We will reply to your comment shortly
    Michael DAtri · 04/06/2016
    Hello. Do you have and dealers in Illinois? How could I get a color sample of all the color stains you offer?

    Thank you.

    Michael D'Atri
  • We will reply to your comment shortly
    Administrator · 04/04/2016
    john buccione:
    Do you have a dealer in the Port Huron Mi. area.

    Not in Port Huron. Closest would be our store in Bloomfield Hills Mi.
  • We will reply to your comment shortly
    john buccione · 04/04/2016
    Do you have a dealer in the Port Huron Mi. area.
  • We will reply to your comment shortly
    Administrator · 03/27/2016
    Carol & Bob Klamert:
    We are looking to cover 20 yr old pressure treated deck. Previously used solid deck stain. After cleaning, sanding & preparing deck would your semi solid stain cover the old pressure treated fairly solid? We have had peeling problems in the past. Deck faces East, not very shaded. Do you have sample cans of the semi solid? Approximatly how many Gal's needed for 700 sq ft two coats?
    Thank you,
    Bob & Carol

    100% of the solid will need to be removed. You should then let the wood season for a month and use the Restore a Deck Kit after the month for prep. The AC is penetrating as long as you prep correctly. You would need about 4 gallons for 700 sq. feet.
  • We will reply to your comment shortly
    Carol & Bob Klamert · 03/26/2016
    We are looking to cover 20 yr old pressure treated deck. Previously used solid deck stain. After cleaning, sanding & preparing deck would your semi solid stain cover the old pressure treated fairly solid? We have had peeling problems in the past. Deck faces East, not very shaded. Do you have sample cans of the semi solid? Approximatly how many Gal's needed for 700 sq ft two coats?
    Thank you,
    Bob & Carol
  • We will reply to your comment shortly
    Administrator · 03/07/2016
    Jeneane lach:
    I am ordering your stain for an IPE deck and sounds like Mahagony would bring out the IPE color but is this like the IPE or Penofin oil where it goes on thin given the density of the wood. So does it need to be applied with applied with a brush and then wiped w/a rag. Or what is the best where to apply and any cautions or suggestions on applying. I know when we used Penofin there were sticky/take spot left in some spots so I just want to make sure we apply it correctly. Also please email me the cost for 2-3 gallons to ship to Maryland. Also how soon can we get it. Thank you. I look forward to hearing from you.

    One light coat for IPE and do not back wipe, just let it dry into the wood. Shipping to ND cost about $15-$20 for 2-3 gallons. Takes 2-3 days.
  • We will reply to your comment shortly
    Jeneane lach · 03/06/2016
    I am ordering your stain for an IPE deck and sounds like Mahagony would bring out the IPE color but is this like the IPE or Penofin oil where it goes on thin given the density of the wood. So does it need to be applied with applied with a brush and then wiped w/a rag. Or what is the best where to apply and any cautions or suggestions on applying. I know when we used Penofin there were sticky/take spot left in some spots so I just want to make sure we apply it correctly. Also please email me the cost for 2-3 gallons to ship to Maryland. Also how soon can we get it. Thank you. I look forward to hearing from you.
  • We will reply to your comment shortly
    Administrator · 10/25/2015
    Shawn Richardson:
    Just inquiring about any Armstrong Clark Dealers in the Owosso, MI area?

    No dealers there. We are located at:

    2388 Franklin Rd
    Bloomfield Hills 48302
  • We will reply to your comment shortly
    Shawn Richardson · 10/25/2015
    Just inquiring about any Armstrong Clark Dealers in the Owosso, MI area?
  • We will reply to your comment shortly
    Administrator · 10/05/2015
    CJ McCallum:
    Can you please tell me if there are any Armstrong dealers in the Atlanta area? Preferably around Marietta, GA.

    There is not but we can ship to you.
  • We will reply to your comment shortly
    CJ McCallum · 10/05/2015
    Can you please tell me if there are any Armstrong dealers in the Atlanta area? Preferably around Marietta, GA.
  • We will reply to your comment shortly
    Administrator · 09/20/2015
    scottylang:
    Dealers in Maryland ?

    There are not any in MD.
  • We will reply to your comment shortly
    Kimberly Lang · 09/20/2015
    Dealers in Maryland ?