Armstrong Clark Stain is a low VOC product and compliant for all states and Canada!

Need it shipped to you? We are able to ship to all states below within 2-5 business days!

We ship from the Metro Detroit Area to Canada. All Canadian shipped orders must be place on website. We do not take orders over the phone to be delivered into Canada. For general questions please call 248.858.8900.

Orders may also be picked up in Metro Detroit Area at our retail location:

2388 Franklin Rd

Bloomfiedl Hills, Mi 48302

Alabama
Arizona
Arkansas
California
Colorado
Connecticut
Delaware
Florida
Georgia
Idaho
Illinois
Indiana
Iowa
Kansas
Kentucky
Louisiana

Maine
Maryland
Massachusetts
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Jersey
New Mexico
New York
North Carolina
North Dakota

Ohio
Oklahoma
Oregon
Pennsylvania
Rhode Island
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
Washington
West Virginia
Wisconsin
Wyoming

 {jcomments on}

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Priscilla Bowling · 04/07/2017
    Dealer in Athens GA?
  • We will reply to your comment shortly
    Armstrong · 04/06/2017
    Jeffrey Vodovis:
    Who is your dealer in Staten Island New York?

    We do not have any dealers there. Shipping takes 2-3 days if ordering online.
  • We will reply to your comment shortly
    Jeffrey Vodovis · 04/06/2017
    Who is your dealer in Staten Island New York?
  • We will reply to your comment shortly
    Armstrong · 04/03/2017
    Tom Leason:
    Do you ship to canada?

    Yes we do ship to Canada.
  • We will reply to your comment shortly
    Armstrong · 04/03/2017
    Macie Garrison:
    I want to buy from store in Midland Tx.

    I am sorry but we do not have any dealers in TX that stock the AC. Please purchase online. Shipping takes about 3-4 business days.
  • We will reply to your comment shortly
    Tom Leason · 04/03/2017
    Do you ship to canada?
  • We will reply to your comment shortly
    Macie Garrison · 04/02/2017
    I want to buy from store in Midland Tx.
  • We will reply to your comment shortly
    Armstrong · 03/22/2017
    Lois Olson:
    Looking to purchase deck stain in or around Fort Collins CO? Any dealers here or near?

    Sorry but no dealers there. We can ship to you from our website.
  • We will reply to your comment shortly
    Armstrong · 03/22/2017
    R. Griffin:
    Are there dealers in the Norwood, MA area for your deck stain? Let me know, thanks.

    Sorry but no dealers there. We can ship to you from our website.
  • We will reply to your comment shortly
    R. Griffin · 03/22/2017
    Are there dealers in the Norwood, MA area for your deck stain? Let me know, thanks.
  • We will reply to your comment shortly
    Armstrong · 03/11/2017
    Deanne Ruble:
    Where can I buy Armstrong sealer in Medford Oregon area?

    Hello, we ship the AC to your area. Takes about 4-5 business days to arrive.
  • We will reply to your comment shortly
    Deanne Ruble · 03/10/2017
    Where can I buy Armstrong sealer in Medford Oregon area?
  • We will reply to your comment shortly
    Armstrong · 03/08/2017
    Charles Mueller:
    Are there any dealers in the Houston/Conroe Texas areas? I live in between, and can't find any Armstrong Clark retailers online in this area.

    There are not any dealers in TX. We can ship to you in 3-4 business days.
  • We will reply to your comment shortly
    Charles Mueller · 03/08/2017
    Are there any dealers in the Houston/Conroe Texas areas? I live in between, and can't find any Armstrong Clark retailers online in this area.
  • We will reply to your comment shortly
    Administrator · 02/26/2017
    Mark Mitrovich:
    Want to stain a new rough-sided cedar pergola, which has not been assembled. The pieces have been stacked in my garage since early December. Does it really need any type of pre-treatment. Wood is very clean.

    If rough cut and the wood is dry, you can stain before install with 1 coat.
  • We will reply to your comment shortly
    Mark Mitrovich · 02/25/2017
    Want to stain a new rough-sided cedar pergola, which has not been assembled. The pieces have been stacked in my garage since early December. Does it really need any type of pre-treatment. Wood is very clean.
  • We will reply to your comment shortly
    Administrator · 11/06/2016
    Steve C:
    Do you have any dealers in Hawaii?

    There are not dealers there.
  • We will reply to your comment shortly
    Steve C · 11/06/2016
    Do you have any dealers in Hawaii?
  • We will reply to your comment shortly
    Administrator · 11/06/2016
    Justin DiMango:
    Wanted to know if you sell or will send out samples for me to try out on my mahogany porch scraps. There's no wayI would buy a stain without first being able to see how it will look on the wood i have.

    http://www.armstrongclarkstain.com/samples
  • We will reply to your comment shortly
    Justin DiMango · 11/05/2016
    Wanted to know if you sell or will send out samples for me to try out on my mahogany porch scraps. There's no wayI would buy a stain without first being able to see how it will look on the wood i have.
  • We will reply to your comment shortly
    Administrator · 10/15/2016
    Kent diffenderfer:
    Hi there I have ipe 1x4,2x6 and 4x4 for a fence. As you know ipe can very in reddish,light tan, browns etc. If I use the mahogany will that give all the pieces a reddish color. And do you have dealers in california I'm in Los Angeles.

    We are an online dealer for the AC products. The Mahogany is a reddish tint.
  • We will reply to your comment shortly
    Kent diffenderfer · 10/14/2016
    Hi there I have ipe 1x4,2x6 and 4x4 for a fence. As you know ipe can very in reddish,light tan, browns etc. If I use the mahogany will that give all the pieces a reddish color. And do you have dealers in california I'm in Los Angeles.
  • We will reply to your comment shortly
    Administrator · 10/12/2016
    Bruce Lowrey:
    Hello Armstrong Clark.

    I am treating two-year old pressure-treated 5/4 pine decking, which has not been sealed since it was installed in the summer of 2014.

    I am interested in the preservation of the wood more than anything else, unlike a stain or coloring. I don't care if the wood is graying. I have an all cypress exterior on the house which is also naturally gray after weathering for twenty years.

    What product(s)do you recommend for this deck application, specifically, the decking and top rails. Spindles are fine as they are. I have approximately 2000 s.f. to 2500 s.f. to cover.

    What is the purpose of the Restore A Deck Kits? Again - I don't care at all how the deck looks. I only want the deck to last as long as possible with the least amount of work.

    I appreciate your response

    I am ready to order as soon as I know what to buy and how much.

    Thanks,

    Bruce Lowrey
    985-778-3303

    RAD Kits are for prepping and you always have to prep before applying. You cannot apply a deck stain without proper prep. Use the Kits for the prep. You will need about 3-4 of them. For the stain, look at Natural. It is lightly tinted. About 3-4 of the 5 gallons pails.
  • We will reply to your comment shortly
    Bruce Lowrey · 10/12/2016
    Hello Armstrong Clark.

    I am treating two-year old pressure-treated 5/4 pine decking, which has not been sealed since it was installed in the summer of 2014.

    I am interested in the preservation of the wood more than anything else, unlike a stain or coloring. I don't care if the wood is graying. I have an all cypress exterior on the house which is also naturally gray after weathering for twenty years.

    What product(s)do you recommend for this deck application, specifically, the decking and top rails. Spindles are fine as they are. I have approximately 2000 s.f. to 2500 s.f. to cover.

    What is the purpose of the Restore A Deck Kits? Again - I don't care at all how the deck looks. I only want the deck to last as long as possible with the least amount of work.

    I appreciate your response

    I am ready to order as soon as I know what to buy and how much.

    Thanks,

    Bruce Lowrey
    985-778-3303
  • We will reply to your comment shortly
    Administrator · 10/07/2016
    Bruce Lowrey:
    Hello,

    Do you have a dealer or stocking distributor in the area around New Orleans or Baton Rouge, LA.?

    We installed a new treated pine deck two years ago, and it looks like it's now ready for a stain & more permanent protection. Your product has been mentioned in several forums.

    Thanks,

    Bruce Lowrrey

    We do not. shipping will take about 3 business days. Make sure the prep the wood first. Use the Restore A Deck Kits.
  • We will reply to your comment shortly
    Bruce Lowrey · 10/07/2016
    Hello,

    Do you have a dealer or stocking distributor in the area around New Orleans or Baton Rouge, LA.?

    We installed a new treated pine deck two years ago, and it looks like it's now ready for a stain & more permanent protection. Your product has been mentioned in several forums.

    Thanks,

    Bruce Lowrrey
  • We will reply to your comment shortly
    Administrator · 09/27/2016
    john Grieco:
    Can you please forward a list of dealers in CT.

    Or, a list of the nearest dealers if no one sells your product in CT.

    Thanks-
    John860-496-9996

    There are not any dealers in the area of CT. Please order online from our website. Thanks!
  • We will reply to your comment shortly
    john Grieco · 09/27/2016
    Can you please forward a list of dealers in CT.

    Or, a list of the nearest dealers if no one sells your product in CT.

    Thanks-
    John860-496-9996
  • We will reply to your comment shortly
    Administrator · 09/22/2016
    Kim Naber:
    Is there anyone in the metro Atlanta, Georgia area that is a dealer of your products?
    Thank you

    There are not dealers in Georgia. Shipping takes 2-3 days to arrive.
  • We will reply to your comment shortly
    Kim Naber · 09/21/2016
    Is there anyone in the metro Atlanta, Georgia area that is a dealer of your products?
    Thank you