Armstrong Clark Stain is a low VOC product and compliant for all states and Canada!

Need it shipped to you? We are able to ship to all states below within 2-5 business days!

We ship from the Metro Detroit Area to Canada. All Canadian shipped orders must be place on website. We do not take orders over the phone to be delivered into Canada. For general questions please call 248.858.8900.

Orders may also be picked up in Metro Detroit Area at our retail location:

2388 Franklin Rd

Bloomfiedl Hills, Mi 48302

Alabama
Arizona
Arkansas
California
Colorado
Connecticut
Delaware
Florida
Georgia
Idaho
Illinois
Indiana
Iowa
Kansas
Kentucky
Louisiana

Maine
Maryland
Massachusetts
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Jersey
New Mexico
New York
North Carolina
North Dakota

Ohio
Oklahoma
Oregon
Pennsylvania
Rhode Island
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
Washington
West Virginia
Wisconsin
Wyoming

 {jcomments on}

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    nancy gray · 04/21/2014
    Where can I buy your product in the St. Louis area?
  • We will reply to your comment shortly
    Administrator · 04/19/2014
    Kathleen, AC cannot be tinted. You can airless spray it. No dealers there but we can ship to you from MI in a couple of days.
  • We will reply to your comment shortly
    Kathleen McCann · 04/18/2014
    Are there dealers where I may purchase stain direct in the Indianapolis, Indiana area?
  • We will reply to your comment shortly
    Kathleen McCann · 04/18/2014
    I am planning on cleaning, prepping barn and outbuildings to stain. There is some damaged wood at the base of the barn. I painted our house last year and would prefer the color to be the same on the outbuildings. Is there a stain that will take this color base and can I use it in an airless paint sprayer?
  • We will reply to your comment shortly
    Craig Loud · 04/11/2014
    Can you tell me your nearest retailer for your stain closest to Central Coast of California 93428. Thank you
  • We will reply to your comment shortly
    Richard Foy · 04/10/2014
    Do you have a dealer in the metro Denver area?
  • We will reply to your comment shortly
    Administrator · 04/09/2014
    We just tested and it works.claud:
    Your contact number doesn't work
  • We will reply to your comment shortly
    claud · 04/09/2014
    Your contact number doesn't work
  • We will reply to your comment shortly
    Administrator · 04/03/2014
    colin woodman:
    Is this available in Canada, specifically Alberta?

    No but we can ship it there form the states.
  • We will reply to your comment shortly
    colin woodman · 04/03/2014
    Is this available in Canada, specifically Alberta?
  • We will reply to your comment shortly
    Administrator · 03/29/2014
    Doug, look at the Armstrong Clark in a semi-transparent or semi-solid color for this. Let weather for 3 months after install and prep first with the Restore A Deck Kit.
  • We will reply to your comment shortly
    Doug Buchan · 03/29/2014
    I'm having a 24x24 cabin built this summer. It is made with pine boards. I want to stain and seal it to protect the wood. What should I use to do both. This cabin will be built in western Pa. on a shady lot. Thanks
  • We will reply to your comment shortly
    Administrator · 03/03/2014
    Scott, sorry but there are not dealers there but we can ship to you.
  • We will reply to your comment shortly
    Scott Rima · 03/02/2014
    We live in the McKinney Texas area (Dallas) and have read many reviews on your stain and want to see if you have any dealers in our area. We have a 15 year old Deck of PTW that we have stripped, sanded and clenaed and ready for stain and paint.
  • We will reply to your comment shortly
    Administrator · 02/18/2014
    Sorry but no dealers there but we can ship to you.
  • We will reply to your comment shortly
    bill · 02/17/2014
    do you have any dealers in the Phoenix area?
  • We will reply to your comment shortly
    Administrator · 02/04/2014
    Best would be the AC in the Mahogany color. Let season for a few months, clean first, then stain. Best to stain with a stain pad applicator.
  • We will reply to your comment shortly
    Jaime Briles · 01/31/2014
    I have a brand new pie deck what color and satin product would provide good uv protection and keep the natural color of the hardwood the best? Also can I sayin immediately after installation and how should I prep the surface and should I use a brush to apply? Any dealers near Long Beach ca?
    Thanks
    Jaime
  • We will reply to your comment shortly
    Administrator · 01/06/2014
    speed51133"][quote name="opwdecks:
    Armstrong Clark does not suggest prestaininig. Best to let the wood dry out so the AC will be able to work well. With cedar wood we suggest 2-3 months for this. Stain the exposed wood after the siding is installed. You will need to prep the wood first.[/quote]

    So you do not suggest staining the back of cedar siding?

    No Need.
  • We will reply to your comment shortly
    speed51133 · 01/03/2014
    opwdecks:
    Armstrong Clark does not suggest prestaininig. Best to let the wood dry out so the AC will be able to work well. With cedar wood we suggest 2-3 months for this. Stain the exposed wood after the siding is installed. You will need to prep the wood first.


    So you do not suggest staining the back of cedar siding?
  • We will reply to your comment shortly
    Administrator · 01/03/2014
    Armstrong Clark does not suggest prestaininig. Best to let the wood dry out so the AC will be able to work well. With cedar wood we suggest 2-3 months for this. Stain the exposed wood after the siding is installed. You will need to prep the wood first.
  • We will reply to your comment shortly
    speed51133 · 01/03/2014
    I am building a home with western red tongue and groove cedar siding. I have been getting conflicting information about when to apply stain. Some reputable sources tell me to pre-finish everything, and all sides. Some stain manufacturers tell me to not stain until the wood has weathered for almost a year, clean and brighten, then stain.

    Do you recommend using your stain on new cedar? It will be kiln dried. What about back staining?
  • We will reply to your comment shortly
    Administrator · 11/13/2013
    terry gibbs:
    I have a new redwood deck that I acid cleaned and sanded. I would like a clear finish because I love the color of the wood and UV protection as it will be in the sunlight. Which product should I get and can I get it asap in California?

    Terry, you must have color in the stain if you want UV protection. Clears will not offer this. We can ship to you from the website.
  • We will reply to your comment shortly
    terry gibbs · 11/12/2013
    I have a new redwood deck that I acid cleaned and sanded. I would like a clear finish because I love the color of the wood and UV protection as it will be in the sunlight. Which product should I get and can I get it asap in California?
  • We will reply to your comment shortly
    Administrator · 11/04/2013
    Brian:
    Do you have any dealers in the Boston (west or Boston) area

    We do not have dealers there but we can ship to you.
  • We will reply to your comment shortly
    Brian · 11/02/2013
    Do you have any dealers in the Boston (west or Boston) area
  • We will reply to your comment shortly
    Administrator · 10/30/2013
    Have you tried the Rustic Brown?
  • We will reply to your comment shortly
    Lindsey Balkcom · 10/30/2013
    Hello Jake, You sent us several samples and we love the product but they are too orange for our liking. Is there a brown you suggest that will allow the grain to show through. We have the Douglas Fir T&G. We also do not want a red undertone, just brown. Thank you!
  • We will reply to your comment shortly
    Administrator · 10/25/2013
    Lynn, no dealers there but we can ship to you in 2-3 business days.
  • We will reply to your comment shortly
    Lynn · 10/24/2013
    Do you have any dealers near Albany NY? If not how long does shipment take? I have questions about when to apply.